Daiichi Electronics SQLC-110L Instruction Manual page 52

◆ 217 Power factor range
Power factor measurement range can be selected from 0.500 to 1.000 to 0.500 / 0.000 to 1.000 to 0.000.
Change of this setting also sets the analog output range of a power factor automatically simultaneously.
Selection by ＋ and － , set value is updated by SET .
Default setting：0.500 to 1.000 to 0.500
0.500 to 1.000 to 0.500
◆ 218 Frequency range
A frequency measurement range can be selected from 45.0 to 55.0Hz /
55.0 to 65.0Hz / 45.0 to 65.0Hz. Change of this setting also sets
the analog output range of a frequency automatically simultaneously.
Selection by ＋ and － , set value is updated by SET .
Default setting：45.0 to 65.0Hz
50：
45.0 to 55.0Hz
＋
＋
0.000 to 1.000 to 0.000
－
－
＋
＋
60：
55.0 to 65.0Hz
－
－
－
＋
55：
45.0 to 65.0Hz
51
Setting factor
New setting
Setting No. Current setting
Frequency range
SQLC-220-086