Daiichi Electronics SQLC-110L Instruction Manual page 55

(3) 241P to 244P Pulse output setting 【With a pulse output option】
Various setting of a pulse output is performed.
241P RESET/
Po1 output factor SHIFT
◆ 241P PO(pulse output) 1 output factor,
243P PO(pulse output) 2 output factor
Set the output factor of each pulse output.
Selection by ＋ and － , set value is updated by SET .
Default setting：Wh (PO1，PO2)
＋
OFF：
Nothing
－
－
6：-varh
＋
◆ 242P PO (pulse output) 1 pulse unit,
244P PO (pulse output) 2 pulse unit
Set the pulse unit of each pulse output.
A pulse unit can be selected from four types.
The pulse unit that can be selected is decided with full load power.
Default setting：10kWh/p (PO1，PO2)
242P RESET/
Po1 pulse unit SHIFT
RESET/SHIFT
＋
1：Wh 2：-Wh
－
－
5：-varh
(LEAD) (LAG)
＋
243P RESET/
Po2 output factor SHIFT
Setting No.
＋
3：varh
(LAG)
－
－ ＋
－
4：varh
(LEAD)
＋
Setting No.
54
244P
Po2 pulse unit
New setting Current setting
Po2 output factor
New setting Current setting
Po1 pulse unit
SQLC-220-086