Daiichi Electronics SQLC-110L Instruction Manual page 34

(8) Setting of analog output.
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items
Press SET and RESET/SHIFT together for longer than 3 seconds
Set the analog
output sensitivity
Press RESET/SHIFT
(％ of an output to
an input) of
Press RESET/SHIFT
current.
(225A)
Selected output sensitivity is entered
Press SET and RESET/SHIFT together for longer than 3 seconds
Set the analog
Press RESET/SHIFT
output sensitivity
(％ of an output to
Press RESET/SHIFT
an input) of active
power.
Select a output sensitivity by ＋ and －
(226A)
Selected output sensitivity is entered
Press SET and RESET/SHIFT together for longer than 3 seconds
Set the analog
Press RESET/SHIFT
output sensitivity
(％ of an output to
Press RESET/SHIFT
an input) of
reactive power.
Select a output sensitivity by ＋ and －
(227A)
Selected output sensitivity is entered
Press SET and RESET/SHIFT together for longer than 3 seconds
Set the output cut
Press RESET/SHIFT
function at the
case in minute input
(0.5％ or less). Press RESET/SHIFT
(At the case of
analog output)
Press RESET/SHIFT
(228A)
Selected action is entered
Setting and operation procedures
Press RESET/SHIFT
(222A) (223A)
Select a output sensitivity by ＋ and －
(225A)
Press RESET/SHIFT
(222A) (223A)
Press RESET/SHIFT
(225A) (226A)
Press RESET/SHIFT
(222A) (223A)
Press RESET/SHIFT
(225A) (226A)
Press RESET/SHIFT
(222A) (223A)
Press RESET/SHIFT
(225A) (226A)
Select a low input cut ON/OFF by ＋ and －
(228A)
Press DISPLAY
33
(211)
Press RESET/SHIFT
(224A)
Press DISPLAY Returns to display mode.
(211)
Press RESET/SHIFT
(224A)
Press SET
Press DISPLAY Returns to display mode.
(211)
Press RESET/SHIFT
(224A)
Press RESET/SHIFT
(227A)
Press SET
Press DISPLAY Returns to display mode.
(211)
Press RESET/SHIFT
(224A)
Press RESET/SHIFT
(227A)
Returns to display mode.
SQLC-220-086
Press MODE
(221A)
Press SET
Press MODE
(221A)
Press MODE
(221A)
Press MODE
(221A)
Press SET
Page
52,53
52,53
52,53
52,53