Troubleshooting; Warranty; Ce Declaration Of Conformity; Environmentally-Friendly Disposal - Wolf Garten HT 40 eM Manual

EN
Risk of injuries or material damage
¾ In case of doubt always take your device to a specialist workshop.
¾ Before any inspection or any work on the device, switch off the motor and remove the operating
arm.
Problem Possible cause
The device switch- The power pack is too hot.
es off.
The power pack is discharged.
The temperature of the device (electronics) is too
high.
Overcurrent release
The device will not The power pack is discharged.
switch on.
Overcurrent release
Power pack temperature too high or too low.
The power pack is defective.
The cutting blade The cutting blade is blunt.
becomes hot.
There is a lot of friction because of a lack of
lubrication.
Uneven running, The cutting blade is damaged.
severe vibration of
The cutting blade fastening has come loose.
the hedge trimmer.

Warranty

The warranty conditions of our local company or
importer apply in all countries. Under the terms of
the warranty we will repair faults on your device
free of charge, insofar as material or manufactur-
ing defects are the cause. To make a claim under
warranty please contact your seller or your nearest
branch.

CE Declaration of Conformity

Further details about the device are con-
tained on the separately enclosed CE
Declaration of Conformity, which forms part
of this instruction manual.
26

Troubleshooting

WARNING!

Environmentally-friendly disposal

Power tools, accessories and packaging must be
disposed of via an environmentally compatible recy-
cling chain.
Remedy
Allow the power pack to cool.
Charge the power pack.
Allow the device to cool and if necessary,
clean the ventilation slots
If this occurs again take your device to a
specialist workshop.
Charge the power pack.
If this occurs again take your device to a
specialist workshop.
Allow the power pack to cool down or
heat up.
Arrange for the power pack in the oper-
ating arm to be checked by a specialist
workshop.
Consult a specialist workshop.
Oil the cutting blade.
Consult a specialist workshop.
Consult a specialist workshop.
Power packs/batteries:
Do not dispose of power packs in domes-
tic waste, by burning or throwing into
water. Power packs must be collected,
recycled or disposed of in an environmen-
tally-friendly manner.
Power tool (without power packs/
batteries):
Do not throw your power tool away with
domestic waste! Take it to a disposal
facility.
Troubleshooting