Advertisement
Available languages
Available languages
Intended use
Intended use
The hedge trimmer is intended solely for the cut-
ting of hedges and bushes with a maximum branch
thickness of 16 mm.
The hedge trimmer is not designed for commer-
cial use and may only be used at home and in the
garden.
Any other use is classed as an unintended use.
The user is liable for any damages arising from
unintended use.
Incorrect/abnormal use
This hedge trimmer should not be used in public
facilities, parks, sports grounds, roads etc. nor in
agriculture or forestry.
Identification plate
Position
The identification plate is located on the casing of
the hedge trimmer.
Note
The label has the status of a certificate. It
must never be altered or obliterated.
Structure H
1 Manufacturer
2 Device group
3 Model name
4 Rated voltage, current type
5 Weight
6 Disposal note
7 Year of manufacture
8 Guaranteed sound level
9 CE label
10 Model number
11 Serial number
Protective equipment
Protective equipment I
Impact protection [8]
The projecting guide rail protects you against
unpleasant impacts, e.g. recoil moments of the cut-
ting blade, if you hit a solid object (wall, floor, etc.).
Operating elements
Operating elements I
1 Lock-on switch
2 On/off switch on handle
3 Handle
4 Holding area for the hand/fastening area for the optional
middle handle
5 Operating arm *(with permanently installed power pack)
6 Locking button
7 Cutting blade
8 Impact protection
9 Protective cover
10 Working angle adjustment locating button
*Necessary operating element (not supplied)
Using for the first time
Supplementary documentation
Make sure the supplied instruction man-
uals of the charger and operating arm
are available. Please read and under-
stand them before using the device.
Power pack charging
Only charge the power pack using the
charger approved by the manufacturer.
The designations of the approved chargers
are listed in the enclosed CE Declaration of
Conformity.
Attention!
The power pack is supplied partially charged. Be-
fore using the device for the first time, fully charge
the power pack to ensure effective performance.
The power pack is permanently installed
in the operating arm.
The power pack must be charged in accordance
Î
with the instructions in the supplementary docu-
mentation.
WARNING!
CAUTION!
EN
23
Advertisement
Chapters
