Table of Contents
Advertisement
3-3
SCREENS, SOFT FUNCTION KEYS AND MENUS
The following comments apply to all O per ation Scr eens within the CO M- 120C. Reading
and under standing these notes is the r esponsibility of the oper ator .
Due to the level of detail r equir ed to fully descr ibe all facets of the CO M- 120C, only
sur face infor mation is pr ovided to help educate the oper ator .
3-3-1
SOFT FUNCTION KEYS
Soft Function Keys ar e alphabetically defined in Appendix D.
3-3-2
CURSOR MOVEMENT
A cur sor , in the shape of a box, is used to identify what is cur r ently editable. Ther e ar e
two methods to move the Cur sor ar ound the active scr een.
Use DATA SCRO LL Keys as long as the cur r ent Cur sor location is not being edited.
O r use TAB Function as follows:
o
Pr ess TAB Key.
o
Enter value in desir ed scr een location using DATA ENTRY Key( s) .
o
Pr ess ENTER Key to complete the oper ation.
3-3-3
EDITING FIELDS USING DATA SCROLL KEYS AND SPINNER
All fields can be edited using DATA SCRO LL Keys and/or DATA SCRO LL Spinner .
Editing Numer ic Data Fields is a special case and is cover ed in par a 4- 1- 3.
r emainder of the fields using DATA SCRO LL Keys and/or DATA SCRO LL Spinner as
follows:
o
Position cur sor on field selected for edit using DATA SCRO LL Keys or TAB
Function.
o
Pr ess ENTER Key to highlight field.
Pr ess DATA SCROLL Key ( ↑) to move up thr ough sear ch field and DATA SCRO LL
o
Key ( ↓) to move down thr ough sear ch field. Alter nate method is to use DATA
SCRO LL Spinner . Tur ning DATA SCRO LL Spinner clockwise per for ms same
oper ation as pr essing DATA SCRO LL Key (↑) .
o
Pr ess ENTER Key to complete oper ation.
3-9
SECTION 3
COMPOSITE
Edit the
Advertisement
Table of Contents
