Table of Contents
Advertisement
SECTION 1
INTRODUCTION
1-7
SPECTRUM ANALYZER
The Spectr um Analyzer monitor s inter nal and exter nal signals r anging fr om 250 kHz to
1000 MHz.
The Scan width r ange is editable fr om 1 kHz to 100 MHz per /div.
The
Sweep r ate and Resolution Band Width ( RBW) ar e editable with a menu or manual edit.
An UNCAL indication appears on the scr een when settings cause an analyzer "uncal"
situation.
The log scales ar e 2 and 10 dB per division.
Amplitude scale units of dBm, dBµV,
dBmV, dBV, dBµW and dBW ar e available in the Independent Spectr um Analyzer and
with the Receive O per ation.
The G ener ate Spectr um Analyzer is a r elative measur ing
device only. Available units ar e limited to dB.
Memor y functions for the Spectr um Analyzer include stor e and r ecall of a tr ace,
compar e a stor ed tr ace to a live tr ace and peak hold. The Slot number is editable.
Exter nal signals can be " off the air " thr ough the Antenna Connector or connected
dir ectly to the T/R Connector .
The Independent and Receive Function Spectr um Analyzer have attenuation of 0 and
30 dB thr ough both connector s. The Spectr um Analyzer is available for display alone or
with all RF G ener ate and Receive functions except wher e the Duplex Tr ansmit and
Receive functions ar e shown simultaneously.
1-7
Advertisement
Table of Contents
