Table of Contents
Advertisement
APPENDIX C - REPACKING FOR SHIPPING
C-1
SHIPPING INFORMATION
IFR Test Sets r etur ned to factor y for calibr ation, ser vice or r epair must be r epackaged and
shipped subject to the following conditions:
C-1-1
AUTHORIZATION
Do not r etur n any pr oducts to factor y without author ization fr om IFR Customer Ser vice
Depar tment.
CO NTACT:
IFR
Customer Ser vice Dept.
10200 West Yor k Str eet
Wichita, Kansas 67215
Telephone:
(800) 835- 2350)
FAX:
(316) 524- 2623
C-1-2
TAGGING TEST SETS
All test sets must be tagged with:
O wner 's identification and addr ess.
•
Natur e of ser vice or r epair r equir ed.
•
Model No. and Ser ial No.
•
C-1-3
SHIPPING CONTAINERS
Test Sets must be r epackaged in or iginal shipping container s using IFR packing mater ials. If
or iginal shipping container s and mater ials ar e not available, contact IFR Customer Ser vice
Depar tment for shipping instr uctions.
C-1-4
FREIGHT COSTS
All fr eight costs on non- war r anty shipments ar e assumed by the customer . ( See " War r anty
Packet" for fr eight char ge policy on war r anty claims.)
C-2
REPACKING PROCEDURE
Make sur e bottom packing mold is seated on floor of shipping container .
•
Adjust handle to lay unlocked against Test Set as shown.
•
Place Elastic Retainer ar ound Test Set to secur e handle.
•
Car efully wr ap Test Set with polyethylene sheeting.
•
Place Test Set into shipping container , making sur e Test Set is secur ely seated in bottom
•
packing mold.
Place top packing mold over top of Test Set and pr ess down until mold r ests solidly on bottom
•
packing mold.
C-1
Advertisement
Table of Contents
