Ltr Trunking Auxiliary Setup Screen - IFR COM-120C Operation Manual

6-12-9 LTR TRUNKING AUXILIARY SETUP SCREEN

The LTR Tr unking Auxiliar y Setup Scr een is pr ovided to setup additional system
par ameter s. This scr een must be configur ed befor e oper ating the LTR Tr unking
Repeater
Simulator or the LTR Tr unking Radio Simulator . Configur e the LTR Tr unking Auxiliar y
Setup Scr een as follows:
1. Radio Ric ID
Displays Mobile Radio
Inter connect Channel
Number . Range is 1 to
250.
2. Fr ee Rep Chan
Displays Fr ee Repeater
Channel Number for
Fr ee Repeater
specified on LTR
Tr unking Repeater
Simulator O per ation
Scr een. Range is 1 to
760. If desir ed, the
Repeater Receive and
Tr ansmit fr equencies
ar e editable to 1 G Hz.
3. Bor der O ffset
Displays status of Bor der O ffset to RF due to pr oximity to Canadian or Mexican
Bor der . Displays ENABLED or DISABLED.
4. System Sync
Displays hexadecimal code used for System Sync Code in Data Wor d. Default
value is 158 ( Hexadecimal) . Range of value is 0 to 1FF ( Hexadecimal) .
5. Decode Data
Displays the polar ity of Decoded Data. This featur e enables the LTR option to
wor k in any fr equency band up to 1 G Hz r egar dless of polar ity.
6. Encode Data
Displays the polar ity of Encoded Data. This featur e enables the LTR option to
wor k in any fr equency band up to 1 G Hz r egar dless of polar ity.
LTR Trunking
Auxiliary Setup
RADIO RIC ID 2
FREE REP CHAN 2
BORDER OFFSET DISABLED
SYSTEM SYNC 158
DECODE DATA NORMAL
ENCODE DATA NORMAL
PORCH ENABLE OFF
KEY UP DELAY
UNKEY DELAY 150 mSec
MAX RETRIES
RETRY TIMEOUT 500 mSec
RECV IF BW 15 kHz
6- 35
40 mSec
3
SECTION 6
OPTIONS
1
2
3
4
5
6
7
8
9
10
11
RETURN
12
00607246