Automatic Test Mode, Test Selection - IFR COM-120C Operation Manual

SECTION 6
OPTIONS
6-15-10
An automatic test facility that subjects a Radio Unit to a ser ies of pr edefined tests.
The test selection scr een allows the user to decide which pr otocol tests ar e r equir ed.
1. Networ k
Name of the networ k
cur r ently in use
( configur ed in the
SETUP scr een) .
2. RU Type
Name of the Radio Unit
type ( configur ed in the
par ametr ics LIMITS
scr een) .
3. RU Pr efix
MPT 1327 pr efix of the
Radio Unit under test.
Valid r ange is 0 to 127.
4. RU Ident
MPT 1327 identity of the Radio Unit under test. Valid r ange is 0 to 8191.
5. ESN
Electr onic Ser ial Number of the RU under test, displayed following a successful
r egistr ation test.
6. Registr ation
This test demands the RU to r egister and inter r ogates the ESN.
7. Moving CCH
This test sends the Radio Unit to another contr ol channel ( defined in the networ k
definition) . An availability check is per for med to ensur e the RU successfully
moved to the new channel. The RU is then moved back to the or iginal contr ol
channel.
8. RU Speech Call
This test attempts to set up a speech call fr om the Radio Unit ( only possible with
dir ect connection to the RU under test) . If unsuccessful, the CO M- 120C pr ompts
to pr ess the RU call button to set up the call. The CO M- 120C pr ompts to clear the
call.

AUTOMATIC TEST MODE, TEST SELECTION

6- 108