Pepperl+Fuchs IUH-F190-V1-FR2-12 Manual page 38

IUH-F190-V1-*, IUT-F190-R4-V1*
Commissioning
Parameterizing the Read/Write Head
Requesting and Setting the Transmission Power
Read out the read/write head's transmission power with the read parameter PT command:
Command:
Confirmation:
Response:
The read/write head's set transmission power is 50 mW (32
Change the transmission power of the read/write head to 100 mW (100
64 ) via the write parameter PT command:
hex
Command:
Confirmation:
Response:
38
Serial Ethernet
RP1UPT.00.00 .00.0A.BE.03.00.55.50.54.
00.00
- .00.06.BE.03.FF.33
.30.31.00.32 .00.0A.BE.03.00.34.00.02.
00.32
Serial Ethernet
WP1UPT.00.02.0 .00.0C.BF.03.00.55.50.54.
0.64 00.02.00.64
- .00.06.BF.03.FF.35
.30.31 .00.06.BF.03.00.36
PROFIBUS/PROFINET
.BE.03.00.55.50.54.00.00
.BE.03.FF.33
.BE.03.00.34.00.02.00.32
corresponding to 50
hex dec
corresponding to
dec
PROFIBUS/PROFINET
.BF.03.00.55.50.54.04.00.
02.00.64
.BF.03.FF.35
.BF.03.00.36
).