Table of Contents
Advertisement
IUH-F190-V1-*, IUT-F190-R4-V1*
Product Description
3.3.17
Singapore
In Singapore, the use of RFID in the UHF range of 866 MHz to 868 MHz is regulated in accor-
dance with EN 302208.
•
UHF frequency range: 866 MHz ... 868 MHz
•
Radiated Power: 3 ... 500 mW
•
Channel bandwidth: 200 kHz
•
Channel spacing: 200 kHz
•
Frequency access method: programmable frequency list
•
Number of predefined channels: 10
Programmable channels: 1, 2, 3, ... 10
Center frequencies: 866.1 MHz, 866.3 MHz, 866.5 MHz, 866.7 MHz, 866.9 MHz,
867.1 MHz, 867.3 MHz, 867.5 MHz, 867.7 MHz, 867.9 MHz
Up to four channels can be parameterized simultaneously and used in sequence.
Default: dense reader mode on channel 1, 7, 4, 10. See chapter 3.2.6.
In Singapore, the use of RFID in the UHF range of 920 MHz to 925 MHz is regulated as follows.
•
UHF wavelength: 920 MHz ... 925 MHz
•
Radiated Power: 3 ... 500 mW
•
Channel bandwidth: 500 kHz
•
Channel spacing: 500 kHz
•
Frequency access method: frequency hopping spread spectrum. See chapter 3.2.7.
•
Number of channels: 10
Channels used: 1, 2, 3, ... 10
Center frequencies: 919.75 MHz + (M x 0.5) MHz
All 10 channels are always used.
3.3.18
South Korea
In South Korea, the use of RFID in the UHF range is regulated as follows:
•
UHF frequency range: 917.2 MHz ... 920.4 MHz
•
Radiated Power: 3 ... 1250 mW
•
Channel bandwidth: 200 kHz
•
Channel spacing: 600 kHz
•
Frequency access method: frequency hopping spread spectrum. See chapter 3.2.7.
•
Number of channels: 6
Channels used: 1, 4, 7, 10, 13, 16
Center frequencies: 917.1 MHz + (M x 0.20) MHz
All 6 channels are always used.
22
; Default = 50 mW
ERP
ERP
; Default = 50 mW
ERP
ERP
; Default = 125 mW
EIRP
EIRP
Advertisement
Table of Contents
