Table of Contents
Advertisement
IUH-F190-V1-*, IUT-F190-R4-V1*
Installation
Note
Do not route the connection cable in the detection range of the antenna.
To attach the read/write head, use 3 screws with a diameter of 4 mm, as well as mounting mate-
rials that are suitable for the type of mounting surface. The tightening torque of the screws
depends on the type of mounting.
Caution!
Mounting the read/write head
Make sure that the read/write head is firmly attached to the mounting surface.
Caution!
Assemblage de la tête de lecture / écriture
Assurez-vous que la tête de lecture / écriture est fermement connectée à la terre.
Note
The installation recommendations made in this document are based on favorable conditions.
Pepperl+Fuchs provides no guarantee of correct function in cross environments.
Mounting the read/write head
Figure 4.1
31
Advertisement
Table of Contents
