Table of Contents
Advertisement
IUH-F190-V1-*, IUT-F190-R4-V1*
Operation
6.8
Error/Status Messages
Status
Description
0
The command was executed correctly.
1
Reserved
2
Switch-on message, reset was executed.
3
Reserved
4
The command is incorrect or incomplete.
The parameter is not in the valid area.
5
No read/write tag in the measurement range.
6
Hardware error, e.g., error during self-test or read/write head defec-
tive.
7
Internal device error.
8
Reserved
9
The parameterized tag type is not compatible with the connected read
head.
A
Singleframe protocol: there are multiple tags in the measurement
range (IUH*).
Multiframe protocol: There are multiple tags in the measurement
range that have the same UII/EPC (IUH*).
Indicates the output of additional information (see "Output Additional
B
Information, "Information" IF" on page 52).
C
Reserved
D
Reserved
Internal buffer overflow; execute reset.
E
F
Indicates the end of an output in the multiframe protocol (see "Proto-
col Mode QV" on page 55).
63
Advertisement
Table of Contents
