Ra[Chk]<Cr; General Error Code For All Command - ICP DAS USA I-7530A User Manual

4.9 RA[CHK]<CR>
Description: Reboot the I-7530A module. If the ERR led is turn on and
the CAN bus status is bus-off, users can use this command to reboot the
module in order to allow it to work in order again.
Syntax: RA[CHK]<CR>
RA
Response: Valid command will reboot the I-7530A module.
Note: It is necessary to enable the "Error Response" function in the I-
7530 Utility, in order to receive Syntax and/or communication error
information at the host PC.
Example:
Command: RA<CR>
The I-7530A module will reboot after it had received this command.
4.10

General Error code for all command

Error code
0x1
0x2
0x3
0x4
0x5
I-7530A RS-232/485/422 to CAN Converter User's Manual (Version 1.2, Sep/2011) ------------- 38
Command character
Invalid command: ?<Error Code><CR>
Table 11: Error code table
The head character of the command string is invalid.
The length of the command string is invalid.
The checksum of the command string is invalid.
Reserved
The RS-232/485/422 receiver is timeout.
Description