P0Bbdspae[Chk]<Cr - ICP DAS USA I-7530A User Manual

4.7 P0BBDSPAE[CHK]<CR>
Description: Change the RS-232/485/422 configuration on the I-7530A
module and then reboot the I-7530A module.
Syntax: P0BBDSPCE[CHK]<CR>
P0
BB
D
S
P
C
E
BB
00
01
02
03
04
05
06
07
08
09
0A
0B
Response: A valid command will write the RS-232/485/422
configuration parameters into the EEPROM and then reboot the I-
7530A module.
I-7530A RS-232/485/422 to CAN Converter User's Manual (Version 1.2, Sep/2011) ------------- 35
Command character
RS-232/485/422 baud rate
Data bit
0 = 5 bits Data formation
1 = 6 bits Data formation
2 = 7 bits Data formation
3 = 8 bits Data formation
Stop bit (0=1 stop bit, 1=2 stop bits)
Parity (0=None, 1=Odd, 2=Even)
Checksum (0=No, 1=Yes)
Error Response (0=No, 1=Yes);
Table 9: RS-232/485/422 baud rate list
110 bps baud rate of RS-232/485/422
150 bps baud rate of RS-232/485/422
300 bps baud rate of RS-232/485/422
600 bps baud rate of RS-232/485/422
1200 bps baud rate of RS-232/485/422
2400 bps baud rate of RS-232/485/422
4800 bps baud rate of RS-232/485/422
9600 bps baud rate of RS-232/485/422
19200 bps baud rate of RS-232/485/422
38400 bps baud rate of RS-232/485/422
57600 bps baud rate of RS-232/485/422
115200 bps baud rate of RS-232/485/422
Invalid command: ?<Error Code><CR>
Description