ICP DAS USA I-7530A User Manual page 16

Note: 1. When the function "Add Checksum" is set to "Yes", users need
to communicate to I-7530A with checksum mechanism.
2. If the "Error Response" is set to "Yes", the error code will be
responded when the incorrect communication commands are
sent to I-7530A.
8. Set the CAN parameters for I-7530A CAN port.
Note: 1. About how to set the Acceptance Code and Acceptance Mask,
please refer to the section 3.2.
2. If the "Pair Connection" is checked, the functions of "End of
RS-232 command", "Fixed Tx CAN ID" , and "Response with
CAN ID" are useful.
3. When "Pair Connection" is checked, I-7530A is into pair
connection mode. If it is unchecked, I-7530A is normal mode.
In pair connection mode, all commands written to I-7530A
COM port will transfer to the CAN bus directly. For more detail
information about pair connection mode, please refer to the
section 3.4.
9. Once users have finished all parameter settings, please click the
"Setting" button to store the communication parameters into the
EEPROM on the I-7530A.
I-7530A RS-232/485/422 to CAN Converter User's Manual (Version 1.2, Sep/2011) ------------- 16