C[Chk]<Cr; P0Bbdspae[Chk]<Cr - ICP DAS USA I-7530 User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
4.6 C[CHK]<CR>
Description: Clear the CAN/RS-232 FIFO overflows error flag on the
module.
Syntax: C[CHK]<CR>
C
Response: Valid Command: No response. This will turn the ERR
LED off after the ERR LED was turned on as a result of the
CAN/RS232 FIFO overflow error flag.
Invalid command: ?<Error Code>[CHK]<CR>
Note: It is necessary to enable the "Error Response" function in the I-
7530 Utility, in order to receive Syntax and/or communication error
information at the host PC.
Example:
Command: C<CR>
4.7 P0BBDSPAE[CHK]<CR>
Description: Change the RS-232 configuration on the I-7530 module and
then reboot the I-7530 module.
Syntax: P0BBDSPCE[CHK]<CR>
P0
BB
D
S
P
C
E
I-7530 RS-232/CAN Converter User's Manual (Version 1.0,Aug/2004, 7PH-021-01) ------------- 22
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Command character.
Command character
RS-232 Baud rate
Data bit
0 = 5 bits Data formation
1 = 6 bits Data formation
2 = 7 bits Data formation
3 = 8 bits Data formation
Stop bit (0=1 stop bit, 1=2 stop bits)
Parity (0=None, 1=Odd, 2=Even)
Checksum (0=No, 1=Yes)
Error Response (0=No, 1=Yes);