Making Settings For The Printer's Fax Features According To Use - Epson WF-2960 Series User Manual

Faxing
>
Before Using Fax Features
"Making Settings to Receive Faxes Operating Only a Connected Phone" on page 75
&
"Basic Settings" on page 219
&

Making Settings for the Printer's Fax Features According to Use

You can configure the printer's fax features individually using the printer's control panel according to use. The
settings made using Fax Setting Wizard can also be changed. For more details, see the descriptions of the Fax
Settings menu.
Related Information
"Fax Settings" on page 218
&
"Making Settings for a PBX Phone System" on page 74
&
"Making Settings When You Connect a Phone Device" on page 75
&
"Receiving Incoming Faxes" on page 87
&
"Making Settings to Save Received Faxes" on page 75
&
"Making Settings for Blocking Junk Faxes" on page 76
&
"Making Settings to Send and Receive Faxes on a Computer" on page 77
&
Making Settings for a PBX Phone System
Make the following settings when using the printer in offices that use extensions and require external access codes,
such as 0 and 9, to get an outside line.
1. Select Settings on the printer's control panel.
2. Select General Settings > Fax Settings > Basic Settings.
3. Select Line Type, and then select PBX.
4. When sending a fax to an outside fax number using # (hash) instead of the actual external access code, select
the Access Code box to make this to Use.
The #, entered instead of the actual access code, is replaced with the stored access code when dialing. Using #
helps avoid connection problems when connecting to an outside line.
Note:
You cannot send faxes to recipients in Contacts that have external access codes such as 0 and 9.
If you have registered recipients in Contacts using an external access code such as 0 and 9, set the Access Code to Do
Not Use. Otherwise, you must change the code to # in Contacts.
5. Tap the Access Code input box, enter the external access code used for your phone system, and then tap OK.
6. Select OK to apply the settings.
The access code is stored in the printer.
>
Making Settings for the Printer's Fax Features According to Use
74