In These Situations; When Replacing A Computer; Saving Power; Disabling Your Wi-Fi Connection - Epson WF-2960 Series User Manual

In These Situations

When Replacing a Computer

You need to install the printer driver and other software on the new computer.
Access the following website, and then enter the product name. Go to Setup, and then start setting up. Follow the
on-screen instructions.
https://epson.sn

Saving Power

The printer enters sleep mode or turns off automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will affect the product's energy efficiency. Please
consider the environment before making any change.
1. Select Settings on the home screen.
2. Select General Settings > Basic Settings.
3. Do one of the following.
Note:
Your product may have the Power Off Settings or Power Off Timer feature depending on the location of purchase.
❏ Select Sleep Timer or Power Off Settings > Power Off If Inactive or Power Off If Disconnected, and then
make settings.
❏ Select Sleep Timer or Power Off Timer, and then make settings.

Disabling your Wi-Fi Connection

If you used to use Wi-Fi (wireless LAN) but no longer need to do so due to a change in connection mode and so
on, you can disable your Wi-Fi connection.
By removing unnecessary Wi-Fi signals, you can also reduce the load on your standby power.
1. Tap
on the printer's home screen.
2. Select Wi-Fi (Recommended).
3. Select Change Settings.
4. Select Others.
5. Select Disable Wi-Fi.
Follow the on-screen instructions.
>

Disabling your Wi-Fi Connection

118