Epson WF-2960 Series User Manual page 159

Solving Problems
Originals that are not supported by the ADF are being used.
Solutions
Use originals supported by the ADF.
"ADF Specifications" on page 230
&
The originals are loaded incorrectly.
Solutions
Load originals in the correct direction, and slide the ADF edge guide against the edge of the originals.
Too many originals are loaded in the ADF.
Solutions
Do not load originals above the line indicated by the triangle symbol on the ADF.
The original slips when paper dust adheres to the roller.
Solutions
Clean the inside of the ADF.
"Cleaning the ADF" on page 110
&
Originals are not detected.
Solutions
On the screen for copy or scan, or fax, check that the ADF icon is on. If it is off, place the originals again.
>
Cannot Print, Scan, or Fax
>
Paper Does Not Feed Properly
159