Table of Contents
Advertisement
65KV2-T
2. Use one of the arrow keys to move between options and modify the se-
lected options by using PgUp / PgDn / + / - keys.
<F1>: "Help" gives options available for each item.
<F5>: Get the previous values. These values are the values with which the
user starts the current session.
<F6>: Load all options with the BIOS default values.
<F7>: Load all options with the Setup default values.
OnChip IDE Channel 0/
Channel 1
IDE Prefetch Mode The on-board IDE drive supports IDE prefetching for
Primary
Master / Slave PIO
Secondary
Master / Slave PIO
Primary
Master / Slave UDMA
Secondary
Master / Slave UDMA
The chipset contains a PCI IDE interface with support
from two IDE channels. Select Enabled to activate the
first and/or the second IDE interface. Select Disabled
to inactivate an interface if you install a primary and/or
second add-on IDE interface.
The choices: Enabled; Disabled.
faster drive accesses. If the IDE device doesn't
support prefetching, set this field to Disabled.
The choices: Enabled; Disabled.
Choose Auto or Mode 0~4. The BIOS will detect the
HDD mode type automatically when you choose Auto.
You need to set to a lower mode than Auto when your
hard disk becomes unstable.
The choices: Auto; Mode 0; Mode 1; Mode 2;
Mode 3; Mode 4.
Ultra DMA33/66/100 implementation is possible only
if your IDE hard drive supports it, if the operating
environment includes a DMA drive, and if your sys-
tem software support Ultra DMA33/66/100. Select
"Auto" to enable BIOS support.
The choices: Auto; Disabled.
64
Advertisement
Table of Contents
