65KV2-T
2- 1 CPU INSTALLATION
WARNING !!!
Never run you processor without the heat sink properly and firmly
attached.
PERMANENT DAMAGE WILL RESULT!
• Pull out the lever from the
1
socket, and then raise the le-
ver up to a 90-degree angle.
• Take notice of the red circles
2
as shown below. While in-
serting the CPU into the
socket, you can find out
there is a definite pin orien-
tation for CPU and socket.
• Make sure that the CPU is
3
placed into the socket tightly.
Then lower down the lever
t o c o m p l e t e t h e C P U
installation.
16