Chapter 4 BIOS Setup
Step 5. Please press <F1> or <F10> to exit or reset your system, Warning ! If the
message "Write Fail" appears while Award "FLASH MEMORY WRITER"
is verifying Flash memory, just repeat the process. Please DO NOT reset
or turn off the system. If the award memory flash utility is not able to update
the BIOS successfully, your system may not be able to boot up.
Step 6. You will need a message "CMOS checksum error-Default loaded" during
booting the system. Press <Del> to run CMOS setup utility, then reload
"LOAD SETUP DEFAULTS" or "Load Optimized Defaults" and save this
change.
45