SOLTEK SL-65KV2-T User Manual page 75

PNP OS Installed Select Yes if the system operating environment is
NOTE:
BIOS will automatically disable all PnP resources except
the boot device card when you select Yes on Non-PnP operating
system.
Reset Configuration
Data
Resource Controlled
IRQ Resources Press Enter. Please refer to the list below:
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Plug-and Play aware (e.g., Windows 95).
Normally, you leave this Disabled. Select Enabled to
reset Extended System Configuration Data (ESCD),
when you exit Setup if you have installed a new add-
on and the system reconfiguration has caused such
a serious conflict that the operating system cannot
boot.
Choose Manual or Auto. The BIOS checks the IRQ /
By DMA channel number on the ISA and PCI card
manually set up if you choose Manual, and the IRQ /
DMA channel number will be checked automatically
if you choose Auto.
IRQ Resources
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
75
Chapter 4 BIOS Setup
Item Help
Menu Level