Table of Contents
Advertisement
65KV2-T
Video Off Method This determines the manner in which the monitor is
V/H SYNC +
Blank
Blank Screen
DPMS Supports
MODEM Use IRQ This determines the IRQ which the MODEM can use.
Soft-Off by PWR-BTTN When Enabled, turning the system off with the on/off
State after Power
Failure
• Press <Enter> on the Wake Up Events item, then there is a list of it appears
for you to choose further setting.
Wake Up Events Enable or turn on the interrupts that you want to
blanked.
This selection will cause the system to turn off
the vertical and horizontal synchronization ports
and write blanks to the video buffer.
This option only writes blanks to the video buffer.
Select this option if you monitor supports the
Display Power Management Signaling (DPMS)
standard of the Video Electronics Standards to
select video power management values.
The choices: 3; 4; 5; 7; 9; 10; 11; NA.
button places the system in a very low-power-usage
state, with only enough circuitry receiving power to
detect power button activity or Resume by Ring
activity.
This field lets you determine the state that your PC
returns to after a power failure.If set to off, the PC will
not boot after a power failure. If set to On, the PC will
restart after a power failure.
awaken the system from a reduced-power mode. Dis-
able or turn off the interrupts that you do not want to
awaken the system from a reduced-power mode.
70
Advertisement
Table of Contents
