SOLTEK SL-65EP User Manual page 74

65EP/65EP+
Suspend Type Select the Suspend Type.
MODEM Use IRQ Name the interrupt request (IRQ) line assigned to the
Suspend Mode After the selected period of system inactivity, the
HDD Power Down When enabled and after the set time of system
Soft-Off by PWR-BTTN When Enabled, turning the system off with the on/off
Wake-up by PCI card This function allows you to enabled the system by
Power On by Ring An input signal on the serial Ring Indicator (RI) line
USB KB Wake-Up
74
The choice:PWRON Suspend, Stop Grant.
modem (if any) on your system. Activity of the se-
lected IRQ always awakens the system.
The choice: 3, 4, 5, 7, 9, 10, 11, NA.
chipset enters a hardware suspend mode, stopping
the CPU clock and possibly causing other system
devices to enter power management modes.
inactivity, the hard disk drive will be powered down
while all other devices remain active.
button places the system in a very low-power-usage
state, with only enough circuitry receiving power to
detect power button activity or Resume by Ring
activity.
wake-up by PCI card.
The choice:Delay 4 Sec,Instant-Off.
(in other words, an incoming call on the modem) awak-
ens the system from a soft off state.
The choice: Enabled, Disabled.
This item will enable you to Wake-up the system by
From S3 USB keyboard when you shut down the computer in
S3 Mode.
The choice:Enabled,Disabled.