Table of Contents
Advertisement
65EP/65EP+
AC97 Audio/Modem This option allows you to decide to enable/disable
the 815 chipset to support AC97 Audio/Modem.
The choice:Auto,Disabled
Onboard/CNR LAN
Use the default setting.
Selection
The choice:Auto,Onboard
IDE HDD Block Mode Block mode is also called block transfer, multiple
commands, or multiple sector read/write. If your IDE
hard drive supports block mode (most new drives do),
select Enabled for automatic detection of the optimal
number of block read/write per sector the drive can
support.
Power ON Function This option allows you to select <KB Power ON
Password> , <Hot-Key Power ON> or others.
The choice:Any Key,Button only,Keyboard 98,
Password,Hot-Key,Mouse Move,Mouse Click.
KB Power ON Pass-
When user sets a password for keyboard, the pass-
word
word user set that return the system to Full On state.
Hot-Key Power ON Boot up the system via predetermined keyboard hot
key.
The choice:<Ctrl>+<F1>...<F12>
Onboard FDC
Select Enabled if your system has a floppy drive con-
Controller
troller (FDC) installed on the system board and you
want to use it. If you install add-in FDC or the system
has no floppy drive, select Disabled in this field.
The choice: Enabled, Disabled.
Onboard Serial
Select a logical COM port name and matching ad-
Port 1 / Port2
dress for the first and second serial ports. Select an
address and corresponding interrupt for the first and
second serial ports.
69
Advertisement
Table of Contents
