SOLTEK SL-65EP User Manual page 68

65EP/65EP+
On-Chip Primary/
Secondary PCI IDE
Master / Slave PIO
Secondary
Master / Slave PIO
Master / Slave UDMA
Secondary
Master / Slave UDMA
USB Controller Select Enabled if your system contains a Universal
USB Keyboard Sup-
USB Mouse Support Select Enabled if your system contains a Universal
Init Display First Initialize the AGP video display before initializing any
68
The chipset contains a PCI IDE interface with sup-
port from two IDE channels. Select Enabled to acti-
vate the first and/or the second IDE interface. Select
Disabled to deactivate an interface if you install a pri-
mary and/or second add-on IDE interface.
The choice: Enabled, Disabled.
Primary Choose Auto\ or Mode 0~4. The BIOS will detect the
HDD mode type automatically when you choose Auto.
You need to set to a lower mode than Auto when your
hard disk becomes unstable.
The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3,
Primary Ultra DMA/66 implementation is possible only if your
IDE hard drive supports it and the operating environ-
ment includes a DMA drive and your system software
both support Ultra DMA/66, select Auto to enable
BIOS support.
The choice: Auto, Disabled.
Serial Bus (USB) controller and you have USB
peripherals.
Select Enabled if your system contains a Universal
port Serial Bus (USB) controller and you have a USB
keyboard.
Serial Bus (USB) controller and you have a USB
mouse.
other display device on the system. Thus the AGP
display becomes the primary display.
Mode 4.