SOLTEK SL-65EP User Manual page 70

65EP/65EP+
UART Mode Select This item allows you to select UART mode.
UR2 Duplex Mode This item allows you to select the IR half/full duplex
Onboard Parallel Port Select a logical LPT port address and corresponding
Parallel Port Mode Select an operating mode for the onboard parallel
ECP Mode Use DMA Select a DMA channel for the parallel port for use
PWRON After PWR-
Game Port Address This item allows you to select the Game Port Address.
Midi Port Address Select a DMA channel for the parallel port for use
Midi Port IRQ This item allows you to select the Midi Port IRQ.
3. Press <ESC> to return to the Main Menu when you finish setting up all
items.
70
The choice:Normal,IrDA,ASKIR,SCR.
function.
The choice:Full,Half.
interrupt for the physical parallel port.
(printer) port. Select Normal, Compatible, or SPP
unless you are certain your hardware and software
both support one of the other available modes.
during ECP mode.
Off:Disable Power Lost Resume function.
Fail On:Enable Power Lost Resume function.
Former Sts.:Use Former status.
The choice:Off,On,Former Sts.
The choice:Disabled,201,209
during ECP mode.
The choice: Disabled,330,300
The choice:5,10