Fluke 6080A Service Manual page 85

Some semiconductors and custom IC's can be
damaged by electrostatic discharge during
handling. This notice explains how you can
minimize the chances of destroying such devices
by:
1. Knowing that there is a problem.
2. Learning the guidelines for handling them.
3. Using the procedures, and packaging and
bench techniques that are recommended.
The Static Sensitive (S.S.) devices are identified in the Fluke technical manual parts list with the symbol
The following practices should be followed to minimize damage to S.S. devices.
3. DISCHARGE PERSONAL STATIC BEFORE
HANDLING DEVICES. USE A HIGH RESIS-
1. MINIMIZE HANDLING
TANCE GROUNDING WRIST STRAP.
2. KEEP PARTS IN ORIGINAL CONTAINERS
UNTIL READY FOR USE. 4. HANDLE S.S. DEVICES BY THE BODY
Page 1 of 2