Fluke 6080A Service Manual page 2

The JOHN FLUKE MFG. CO., INC warrants each instrument it manufactures to be free from defects in
material and workmanship under normal use for 2 years from the date of purchase. This warranty extends
only to the original purchaser. This warranty shall not apply to fuses, disposable batteries, or any product or
parts that have been subject to misuse, neglect, accident, or abnormal conditions of operation.
In the event of failure of a product covered by this warranty, JOHN FLUKE MFG. CO., INC will repair and
calibrate an instrument returned to an authorized Service Center within 2 years of the original purchase;
provided the warrantor's examination discloses to its satisfaction that the product was defective. The
warrantor may, at its option, replace the product in lieu of repair. With regard to any instrument returned
within 2 years of the original purchase, said repairs or replacement will be made without charge. If the failure
has been caused by misuse, neglect, accident, or abnormal conditions of operation, repairs will be billed at a
nominal cost. In such case, an estimate will be submitted before work is stated if requested.
If any failure occurs, the following steps should be taken:
1. Notify the JOHN FLUKE MFG. CO., INC or nearest Service Center, giving full details of the
difficulty. Include the model number, type number, and serial number.
On receipt of this information, service data or shipping instructions will be forwarded to you.
2. On receipt of the shipping instructions, forward the instrument, transportation prepaid.
Repairs will be made at the Service Center and the instrument will be returned prepaid.
SHIPPING TO MANUFACTURER FOR REPAIR OR ADJUSTMENT
All shipment of JOHN FLUKE MFG. CO., INC instruments should be shipped in the original packing carton (if
available). If the original carton is not available, use any suitable container that is rigid and of adequate size. If
a substitute container is used, the instrument should be wrapped in paper and surrounded with at least four
inches of shock-absorbing material.
WARRANTY