Fluke 6080A Service Manual page 21

IEEE-488
INTERFACE FUNCTIONS
INTERNAL MODULATION SOURCE
SINE WAVE
DISPLAY RANGES
FREQUENCY RESOLUTION
OUTPUT LEVEL RANGE
DISTORTION
OUTPUT IMPEDANCE
EXTERNAL MODULATION
1V peak provides indicated modulation index.
Nominal input impedance is 600 ohms. Maximum input level is ± 5 V peak.
MODULATION MODES
Any combination of AM, PULSE, and FM, internal or external, may be used.
GENERAL
TEMPERATURE
Operating
Non-Operating
HUMIDITY RANGE
Operating
ALTITUDE
Operating
VIBRATION
Non-Operating
SHOCK
Non-Operating
Table 1-3. 6080A/AN Specifications (cont)
SH1, AH1, T5, TE0, L3, LEO, SR1, RL1, PRO,
DC1, DT1, C0, and E2. Complies with IEEE Std.
488.1-1987 and 488.2-1987.
10 Hz to 100 kHz synthesized sine wave.
00.1 to 99.9 Hz
100 to 999 Hz
1.00 to 9.99 kHz
10.0 to 99.9 kHz
100 to 200 kHz
0.1 Hz or 3 digits
0 to 1V RMS into 600 ohms
< 2% THD
600 ohms ±10%
0 to +50°C (+32 to +122°F).
-40 to +75°C (-40 to +167°F).
95% to +30°C, 75% to +40°C, and 45% to +50°C.
Up to 10,000ft.
5 to 15 Hz at 0.06 inch, 15 to 25 Hz at 0.04 inch,
and 25 to 55 Hz at 0.02 inch, double amplitude (DA).
MIL T 28800D Class 5, Style E.
INTRODUCTION AND SPECIFICATIONS
1-7