Related Manuals for Glow Bricks Lego Ferrari Daytona SP3 42143
Summary of Contents for Glow Bricks Lego Ferrari Daytona SP3 42143
- Page 2 Start with the front by the shown lighting parts...
- Page 3 Remove the following parts from the car to assemble with the lights Stick the led bars ON TOP and the black lighting tiles at bottom...
- Page 4 Then put them back to the car and hide the cables and connector inside the luggage For the rear side, remove the shown part and detach it as the following picture The black plates would be replaced by this lighting parts...
- Page 5 After assemble the lighting plates, restore all of the clear black tiles on the lights Move the remain lights to the back then put the spoiler back on it Then assemble the grey lighting parts at below by passing them through the bottom Then hide the cables underneath the parts...
- Page 6 Before putting the rear part back to the car, make sure the connector is on the top and the red lighting bars go to the bottom...
- Page 7 After restoring the rear part, replace the red bar by the lights Now take the lighting parts with four lighting tiles...
- Page 8 Take away the top and stick the shorter lighting tiles on the shown spot Move the connector to the luggage from the gap on the side...
- Page 9 Open the engine cover, stick the longer lighting tile besides the window and connect the plugs with the lighting parts at last step Shut the cover and make sure you can’t see the cable from outside...
- Page 10 Now turn the car upside down and assemble this lighting parts at the bottom Stick the lighting tiles at the shown position and make sure the tile with connector attached belongs to the front side...
- Page 11 Pass the connector through the hole to the luggage At last, we have all three connectors in the luggage area, you may choose to connect with the battery case to power by battery and hide the case inside the luggage...
- Page 12 Otherwise, to power by USB cable, pass the connectors through the hole into the luggage then connect with them At last, connect both the plugs to the USB cable...
Need help?
Do you have a question about the Lego Ferrari Daytona SP3 42143 and is the answer not in the manual?
Questions and answers