Alarm Mode - Savch SDA2 Series User Manual

Control
Display
mode
Torque
control
Tips: If the servo motor drive is power on, then display (action mode of control status display).
The display content can be changed when it is power on in parameter P2.77.

3.4 Alarm Mode

3.4.1 Present alarm：
Display the present alarm detection content via code
If the alarm reset is performed, it will move automatically to initial display.
If the alarm is detected, it will display as below automatically or display with the alarm information
3.4.2 Alarm history
It can display 20 detected alarm records.
By using button [∧],[∨] can send the display.
Name
Servo OFF
Servo ON
Manual operation
LV Status
AL-01
[MENU] [SET]
oL1
[MENU] [SET]
rc01
[MENU] [SET]
9999
AL-02
[MENU] [SET]
no.01
[MENU] [SET]
oc1
[MENU] [SET]
rc01
[MENU] [SET]
9999
No power to motor. No drive power in servo motor
Servo motor is under rotatable operation
Being rotating is feed by manual
Low voltage. For more detail information, please refer to the
page regarding the under voltage
∧/∨
rc02
∧/∨
no.02
∧/∨
rc02
41
Content
∧/∨
rc13
33
∧/∨
no.20
∧/∨
rc13
33