Control Status Display Mode - Savch SDA2 Series User Manual

3.3 Control Status Display Mode

Control status display mode means the servo motor drive‟s output signal and running status.
Press key [MENU] to display [Cn-01], press [SET] to display description.
Action mode
Means servo motor drive‟s output signal and running status
Cn-01
[SET]
—
Control
Display
mode
Position
control
Speed
control
[MENU]
PoF
Name
Servo OFF
Servo ON
Manual operation
Pulse operation
Auto-operation
Homing
Interrupt positioning
+OT
−OT
Zero speed stop
LV Status
Servo OFF
Servo ON
Manual operation
+OT
−OT
Zero speed stop
LV Status
Zero speed
Speed coincidence
Ready for servo-on
No power to motor. No drive power in servo motor
Servo motor is under rotatable operation
Being rotating is feed by manual
Pulse is being inputted
Being positioning operation
Being homing
Being interrupt positioning
Overrun signal of the forward direction is being detected
Overrun signal of the reverse direction is being detected. "P"
and "−" display alternately
Input forced-to-stop signal to make it stop at zero speed.
Low voltage. For more detail information, please refer to the
page regarding the under voltage
No power to motor. No drive power in servo motor
Servo motor is under rotatable operation
Being rotating is feed by manual
Overrun signal of the forward direction is being detected
Overrun signal of the reverse direction is being detected.
Input forced-to-stop signal to let it stop at zero speed
Low voltage. For more detail information, please refer to the
page regarding the under voltage
40
PoF
Content