SOLTEK SL-75KIV User Manual page 76

75KIV
Wake Up On LAN/Ring An input signal on the serial Ring Indicator (RI) line
RTC Alarm Resume When Enabled, you can set the data and time at which
Date (of Month) Set a certain date when RTC Alarm Resume option
Resume Time (hh:mm:
Primary INTR When set to On, any event occurring at will awaken a
IRQS Activity Monitor-
(in other words, an incoming call on the modem) awak-
ens the system from a soft off state.
The choice: Enabled, Disabled.
the RTC (Real Time Clock) alarm awakens the sys-
tem from suspend mode.
The choices: Disabled; Enabled.
is Enabled to awaken the system. This option is con-
current with Resume Time option.
Set a certain time when RTC Alarm Resume option is
ss) Enabled to awaken the system. This option is con-
current with Date option.
system which has been powered down.
On : The system can not enter the power saving mode
when I/O ports or IRQ# is activated.
Off: The system can enter the power saving mode
when I/O ports or IRQ# is activated.
The following is a list of IRQs (Interrupt ReQuests),
which can be exempted much as the COM ports and
ing
LPT ports above can. When an I/O device wants to
gain the attention of the operating system, it signals
this by causing an IRQ to occur. When the operating
system is ready to respond to the request, it inter-
rupts itself and performs the service. When set On,
activity will neither prevent the system from going into
a power management mode nor awaken it.
76