Datakom D-100 MK2 User Manual page 2

D-100 MK2 User Manual
Any unauthorized use or copying of the contents or any part of this document is prohibited.
This applies in particular to trademarks, model denominations, part numbers and drawings.
This document describes minimum requirements and necessary steps for the successful installation of
the D-100 family units.
Follow carefully advices given in the document. These are often good practices for the installation of
genset control units which reduce future issues.
For all technical queries please contact Datakom at below e-mail address:
If additional information to this manual is required, please contact the manufacturer directly at below e-
mail address:
Please provide following information in order to get answers to any question:
- Device model name (see the back panel of the unit),
- Complete serial number (see the back panel of the unit),
- Firmware version (read from the display screen),
- Measuring-circuit voltage and power supply voltage,
- Precise description of the query.
FILENAME
500-Rainbow Installation
500-Rainbow Usage
500-GSM Configuration
100-Firmware Update
500-MODBUS
500-Rainbow Scada Installation
500-Rainbow Scada Usage
K96D01-EN
COPYRIGHT NOTICE
ABOUT THIS DOCUMENT
technical.support@datakom.com.tr
QUERRIES
technical.support@datakom.com.tr
RELATED DOCUMENTS
Rainbow Plus D-500 D-700 Installation Guide
Rainbow Plus D-500 D-700 Usage Guide
GSM Configuration Guide for D-500 D-700
Firmware Update Guide for D-100
Modbus Application Manual for D-500 D-700
Rainbow Scada Installation Guide
Rainbow Scada Usage Guide
- 2 -
Firmware V-6.3
DESCRIPTION