Setting Up The Communications Port Using Os/2 - Lexmark J110 Reference Manual

Setting Up the Communications Port Using OS/2

1
From the desktop of your PC, right click on the printer icon for the printer
you want to set up.
2
Select Printer Properties.
3
Select Output Port.
4
From the icons displayed, select one from the following: COM1, COM2,
COM3, COM4
5
Once the communications port is highlighted, right click on it.
6
Select Properties.
7
On the screen displayed, fill out the fields for the following printer settings
to make them match your printer settings:
•
•
•
•
•
•
•
8
Select OK.
The communications port is now set up.
9
Close the window to return to the desktop.
Description
Timeout
Baud Rate
Word Length
Parity
Stop bits
Handshake
8-5
Interfaces