Lexmark J110 Reference Manual page 253

Table 4-15: PostScript Emulation Device Parameters (Continued)
Key Type
Device Parameters for the Communication Device %EtherTalk%, %EtherTalkA%, %EtherTalkB%, %EtherTalkC%,
%EtherTalkD%
(%EtherTalk_NV% and %EtherTalk_Pending% contain the same parameters)
DelayedOutputClose boolean
Enabled boolean
EthernetAddress string
EtherTalkType string
EtherTalkZone string
Filtering name
HasNames boolean
Interpreter name
NodeID integer
4-86
Definition
Selects how the printer manages the port at the end of each print job.
Supported values are:
True An end-of-file message is not sent until the current job and all
preceding jobs finish printing.
False An end-of-file message is sent as soon as a job finishes
executing in the interpreter, whether or not that job has
finished printing.
This value is set independently for each port.
(Read-only)
Supported values are:
True
False
(Read only) The Ethernet address of the Ethernet internal print server.
Legal value: Any string of 17 or fewer non-null characters.
The "type" of the EtherTalk interface entity name. This parameter also sets
the LocalTalkType parameter to the same value. The new value is
returned by the appletalktype compatibility operator.
Legal value: Any string of 32 or fewer non-null characters. Default value is
LaserWriter.
Note: Setting this variable does not affect the value for other physical
internal print servers. The statusdict string appletalktype is correct for the
current job port.
The "zone" of the EtherTalk interface entity name.
EtherTalkZone is read/write only to RAM. There is no NVRAM variable for
EtherTalkZone.
Legal value: Any string of 32 or fewer non-null characters.
Indicates if the input needs further filtering before the data can be correctly
processed. Supported values are:
InterpreterBased
None
(Read-only) Always returns False.
(Read-only)
Supported values are:
PostScript
AutoSelect
PCL
PPDS
(Read-only)
PostScript