Lexmark J110 Reference Manual page 268

Table 4-15: PostScript Emulation Device Parameters (Continued)
Key Type
LogicalSize integer
Mounted boolean
PhysicalSize integer
Removable boolean
Searchable boolean
SearchOrder integer
Type name
Writeable boolean
Device Parameters for the IODevice %rom%
BlockSize integer
Free integer
HasNames boolean
InitializeAction integer
LogicalSize integer
4-101
Definition
This parameter is not used for InitializeAction.
InitializeAction always formats to PhysicalSize, regardless of what is
specified in LogicalSize. A query returns the current size (in pages) of the
file system on the device.
A value of 0 (zero) indicates that the device is not mounted.
Legal value: Any non-negative integer, including 0 (zero).
The value of LogicalSize must be less than or equal to the value of
PhysicalSize. A rangecheck error occurs if you try to set a larger value or
set the value to 0 (zero).
True System attempts to mount the flash.
False System attempts to dismount the flash.
When a device is mounted, it becomes known to the system and is
readable, depending on the nature of the device.
A device must contain a valid file system or it will not mount successfully. To
verify if the device is currently mounted, query this parameter immediately
after setting it.
(Read-only) Indicates the size of the flash (in pages) for a flash that is
mounted. A value of 0 indicates that the device is not mounted.
(Read-only) Indicates if the drive supports removable flash.
(Read-only) Indicates if the flash participates in searches in file system
operations that specify a filename without specifying a device.
(Read-only) If the Searchable parameter is True, indicates the priority at
which the flash is searched for a file in operations where no device has
been specified. A lower integer indicates a high priority. If the Searchable
parameter is False, the value of this integer has no meaning.
(Read-only) This constant always returns the value of /FileSystem.
(Read-only) Indicates if the files on the flash can be opened for write
access. A write-protected flash returns False. When the flash is not
mounted, this parameter indicates if the device supports writeable media.
(Read-only)
(Read-only) Indicates the amount (in pages) of free space available in
ROM. Valid only if the ROM is mounted (mounted is set to True). A value of
0 (zero) indicates that either the ROM is not mounted or it is full.
(Read-only) Indicates if ROM supports named files. Valid only if ROM is
mounted (mounted is set to True). If ROM is not mounted, this parameter
has a value of False.
(Read-only) Always returns a value of 0 (zero), which indicates no action.
(Read-only)
PostScript