Font And Symbol Set Support For The Lexmark J110 - Lexmark J110 Reference Manual

Font and Symbol Set Support for the Lexmark J110

The Lexmark J110 printer supports PCL 3 fonts including four bitmapped fonts.
Several parameters are used to select a font from the data stream. These include
symbol set, spacing, point or pitch, style, weight, and typeface number. For scalable
fonts, you can vary the size of a font by specifying pitch or point size. For bitmapped
fonts, you must choose the pitch or point size listed on the font sample pages. You can
print the font sample pages from the printer operator panel or through MarkVision
Professional. Refer to your printer user documentation for more information.
A symbol set defines which characters are available for a font and the code point for
each of these characters. Your printer supports 19 symbol sets. The table beginning
on 2-20 shows the symbol sets available for each font in PCL emulation. Not all fonts
support all symbol sets.
You can select a font as the PCL emulation default from the printer operator panel or
through MarkVision Professional. Refer to your printer user documentation for more
information.
The Lexmark J110 default driver is a host based printing solution designed to produce
optimal performance for printing. The data stream is optimized to reduce network load
requirements. The driver can use all fonts installed on a Windows or Macintosh
operating system.
The following table lists the PCL fonts, and the available point sizes and pitches for
each font:
Table 2-10: Lexmark J110 Fonts
Font Name
CGTimes
CGTimes Italic
Univers
Univers Italic
Courier
Courier Italic
Letter Gothic
2-20
Available Point Sizes
Proportional Fonts
5, 6, 7, 8, 10, 12, 14
5, 6, 7, 8, 10, 12, 14
5, 6, 7, 8, 10, 12, 14
5, 6, 10, 12
Fixed-Width Fonts
6, 12, 24
6, 12, 14
6, 12, 24
PCL
Available Pitches
5, 10, 16.67, 20
5, 10, 20
6, 12, 24