Lexmark J110 Reference Manual page 75

Parameters:
Use the NAME parameter to assign a character string name to a particular job.
The name may be any combination of printable characters, spaces or horizontal
tabs up to a maximum of 80 characters, spaces, or tabs. The
enclosed in double quotes, as indicated by the command syntax.
Use the START parameter in conjunction with the END parameter to skip the
printing of a particular portion of the job. The emulator discards pages of a job
until the page specified by this parameter is reached. The
from 1 to 2,147,483,647. Omission of the START parameter causes the printer to
start printing with page 1 of the job.
Use the END parameter in conjunction with the START parameter to skip the
printing of a particular portion of the job. The emulator discards all pages of a job
after the
to page 1 of the print job and its range is from 1 to 2,147,483,647. Omission of
the END parameter causes the printer to print all pages to the end of the job.
A system administrator can control which jobs, and therefore which users, are
allowed to modify the printer default or NVRAM variables by declaring a PJL
password. With a PJL password declared, the PASSWORD parameter with the
correct PASSWORD number must be specified in order to modify the default
printer environment.
A PJL JOB command with the correct PASSWORD must be issued before any
PJL command can modify an NVRAM setting. The PJL EOJ command
terminates the job and disables any further modification of NVRAM. If a PJL
password is declared and the wrong PASSWORD number is specified on the
PJL JOB command, the printer will delay one half of a second before processing
the next command.
For detailed information on PJL password protection, see "File and Device
Protection Commands" on page 3-92.
Note: Setting a default PJL password disables the use of PJL DEFAULT and
INITIALIZE commands. (See "DEFAULT Command" on page 3-8 and
"INITIALIZE Command" on page 3-11.)
3-5
has been printed. The specification of
PJL
must be
range is
is relative