Lexmark J110 Reference Manual page 112

Table 3-4: Printer Unique Variables for Both Printer Languages (Continued)
Variable
LREAROUTBINNAME
LREPEATPRINTLIMIT
(DEFAULT only)
LRESET
LRESOURCESAVE
(DEFAULT only)
LSCREENING
LSEPARATORSHEETS
LSEPARATORSOURCE
LSTANDARDOUTBINNAME
(DEFAULT only)
Function Selections
Rear Output Bin "name"
Name
name is a variable that allows for custom naming of
optional output bins. The text string is truncated to 24
characters.
When queried, the quotes are not returned around the
string name. The default name is returned unless you
have specified a custom name.
Print and Hold 0 to 50 jobs
Repeat Print
Specifies the number of Repeat Print jobs that can be
Job Limit
held in printer memory.
If the Repeat Print Job Limit setting is not equal to 0, a
DINQUIRE or INQUIRE returns the numerical setting
for LREPEATPRINTLIMIT. If Repeat Print Job Limit
setting is set to Disabled, a DINQUIRE or INQUIRE
returns 0.
Reset Control ON, OFF
When the LRESET variable is set to ON,
P is available in the JOB MENU when the
RINTER
printer is in the
most printers with a printer operator panel.
If this variable is set to OFF,
available.
Resource Save ON, OFF
Color COLORGRADE, IMAGESONLY, IET
Screening
Selections
Indicates where NONE, BETWEENCOPIES, BETWEENJOBS,
separator BETWEENPAGES
sheets are
placed within
the print job
Indicates which TRAY1, TRAY2, TRAY3, TRAY4, TRAY5, FEEDER,
source contains MPFEEDER, MANUALPAPER, MANUALENVELOPE
the separator
sheets
Standard "name"
Output
name is a variable that allows for custom naming of
Bin Name
output bins. The text string is truncated to 24
characters.
When queried, the quotes are not returned around the
string name. The default name is returned unless you
have specified a custom name.
3-42
R
ESET
or state. This is true for
Busy Waiting
R P is not
ESET RINTER
PJL
Factory Default
REAROUTBIN
5
ON
OFF
COLORGRADE
NONE
TRAY1
UPPER