Supplemental Operator Summary - Lexmark J110 Reference Manual

Supplemental Operator Summary

To determine which operators your printer supports, see Table C-1 on page C-1.
appletalktype
in statusdict
parameter from the %LocalTalk% device. The default
change the type portion (appletalktype) of the AppleTalk network name and
redefine the string, execute the following:
When you redefine a string inside the normal server loop, it is reset to the default
value at the end of the print job. When you define it outside the normal server
loop, it is reset to the default value when the printer is switched to a printer
language other than PostScript emulation or when a power-on reset occurs.
Errors: rangecheck, stackoverflow, typecheck
buildtime
returns the BuildTime system parameter, which is a timestamp that identifies
the specific build of the PostScript emulation interpreter.
Error: stackoverflow
byteorder
returns a boolean on the stack with the same value as the system parameter
ByteOrder. Indicates the printer microprocessor native byte order. The boolean
values indicate:
Error: stackoverflow
this string reflects the current value of the LocalTalkType device
,
/appletalktype
low-order byte first
high-order byte first
4-23
def
PostScript
is . To