Advertisement
While radiator heating is operating, for setting temperature of tap water,it is needed
to change operation mode of the device as tap water heating. At the end of this
process, device must be taken to previous operation mode.( Check 6.4.8)
After 2 sec later setting completed, device operation temperature and "Water Temp"
expression are seen at the LED.
Boiler heating is always priority.
After device heats the boiler, it operates for radiator heating. Boiler heating starts
again when decreases 7
6.4.4. Temperature Difference Setting
Tempereature difference between Heating exit and Heating return of device can be
set. While the device is in normal operation mode;
Enter setting menu by pressing
o
C from set temperature.
2-3 seconds.
32
Advertisement
