Advertisement
5. DEVICE INSTALLATION
Device installation must be done by authorised personnel.
5.1. Installation Conditions and Safety Warnings
Obey minimum distance that is anticipated for installation in order to reach the device
for making maintenance and repair.
For Correct Device Installation;
Installation must not be made on the cooker or similar cooking devices.
Do not leave combustion products inside device installed room.
Heating sensitive walls (for example wooden walls) must be protected with steady
insulation.
Before the installation, all system pipes must be washed carefully for removing
any residual things that can give damage to operation of the device.
When heating system increases over 3 bar, water disposal starts from safety
valve.
When boiler pressure increases over 8 bar, drainage starts from safety valve. (For
Ukdax-xxEBM and Ukdax-xxEBT )Boiler max operating pressure is 6 bar. If you
suspect that system pressure is over 6 bar, install pressure reducer to inlet of
device or flat entrence.
17
Advertisement
