Advertisement
By pressing
button or if not pressing any button for a 10 sec, exit from setting
menu by saving settings.
6.4.2. Radiator Temperature Setting
While
or
symbols are seen at LED Display, (when device is operating for
o
o
radiato system) radiator heating setting can be made between 35
C and 80
C by
buttons. While radiator heating setting is made, "Water Temp"
pressing
or
expression fizzle out, While the device is operating for tap water heating, hot water
flow must be stopped for setting radiator temperature. In case the operation mode is
set to tap water heating, it is necessary to switch the operation mode to radiator
heating for setting radiator temperature. At the end of the process, the device should
be taken back to its previous operating position. (See 6.4.8)
After 2 sec later setting completed, device operation temperature and "Water Temp"
expression are seen at the LED. Reaching setting temperature of device may take
time. After boiler water heating is completed, radiator heating does not start
30
Advertisement
