Discharge Lamp Warning - ADJ HYDRO BEAM X1 User Manual

Hide thumbs Also See for HYDRO BEAM X1:
Table of Contents

Advertisement

D I S C H A R G E L A M P W A R N I N G
To achieve the intensity associated with discharge lamps, these lamps use gas sealed in a
high-pressure environment to emit a brilliant output. Due to the high pressure involved with
the construction of the lamp, the lamp MAY EXPLODE DURING PROLONGED EXTENSIVE USE.
This risk is increased with age, and therefore additional care is encouraged when dealing with
older lamps. The lamp must always be replaced at the end of its recommended duty cycle.
Extreme caution should be used when operating this or any fixture fitted with a gas discharge
lamp.
UV RADIATION NOTICE
This fixture emits intense UV radiation, which is harmful to the eyes and skin. The
intense luminescence of the lamp can cause severe damage to the retina. NEVER
operate this fixture with ANY of the protective covers removed. These covers have
been specially designed to shield against UV radiation.
This fixture is fitted with a DISCHARGE LAMP, which is highly
susceptible to damage if improperly handled. NEVER touch the
lamp with your bare hands, as the oil from your hands will short-
en the life of the lamp. NEVER move the fixture until the lamp has
had ample time to cool. Lamps are NOT covered under warranty
conditions. Avoid switching the fixture ON and OFF repeatedly in
short intervals, as this will reduce lamp life and intensity.
12

Advertisement

Table of Contents
loading

Table of Contents