Table of Contents
Advertisement
3 Sixty 2R
To optimize the performance of this product, please read these operating
instructions carefully to familiarize yourself with the basic operations of
this unit. These instructions contain important safety information regard-
ing the use and maintenance of this unit. Please keep this manual with
the unit, for future reference.
3 Sixty 2R
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact ADJ Products, LLC.
During operation the housing may become extremely hot. Avoid
touching the unit with bare hands while in use.
ADJ Products, LLC will not accept any liability for any resulting dam-
ages caused by the non-observance of this manual or any unauthor-
ized modification to this unit.
3 Sixty 2R
The 3 Sixty 2R carries a one year limited warranty. Please fill out the
enclosed warranty card to validate your purchase. All returned service
items whether under warranty or not, must be freight pre-paid and
accompany a return authorization (R.A.) number. The R.A. number
must be clearly written on the outside of the return package. A brief
description of the problem as well as the R.A. number must also be
written down on a piece of paper and included in the shipping carton.
If the unit is under warranty, you must provide a copy of your proof of
purchase invoice. You may obtain a R.A. number by contacting our
customer support team on our toll free customer support number. All
packages returned to the service department not displaying a R.A.
number on the outside of the package will be returned to the shipper
at the shippers cost.
ADJ Products, LLC - www.adj.com - 3 Sixty 2R Instruction Manual Page 6
General Instructions
Handling Precautions
Product Registration
3 Sixty 2R
Important Discharge Lamp Warning
This fixture is fitted with a discharge lamp which is highly
susceptible to damage if improperly handled. Never touch
the lamp with your bare fingers as the oil from your hands
will shorten lamp life. Also, never move the fixture until the
lamps have had ample time to cool. Remember, lamps are
not covered under warranty conditions.
This unit emits intense UV radiation which is harmful to the eyes and skin. The intense
luminance of the lamp can cause severe damage to the retina. Never operate this unit
without it's covers, these covers have been specially designed to shield against UV
radiation.
Epileptic Warning: Those suffering from epilepsy should avoid looking directly into
the lamp at all times.
Avoid switching the fixture on and off repeatedly in short intervals as this will reduce
lamp life and intensity.
To achieve the intensity associated with discharge lamps, these lamps use gas sealed
in a high pressure environment to emit a brilliant output. Due to the high pressure
involved with the construction of the lamp, the lamp may explode during prolonged
extensive use. This risk is increased with age, added care is encouraged when dealing
with older lamps. Extreme caution should be used when operating this or any fixture
fitted with a gas discharge lamp. Never open this unit while in use.
VERY IMPORTANT:
This is for your safety and the life length of the unit.The
Philips® Platinum 2R Discharge lamp has lifetime of 6,000 hours.
Because of the nature of the extreme heat associated with the Platinum 2R lamp and
the tight nature of the internal optical system it is imperative that the lamp be replaced
every 6000 hours. This is done to protect the internal optical system as well as prevent
accidental lamp explosion, which could lead to hot glass particles falling from the fix-
ture. Failure to change the lamp within 300 hours of operation will result in automatic
shut down of the fixture's electronics.
At 6000 hours the display will begin to flash "Replace The Lamp" and the lamp will
flicker for the first five minutes of operation. At this point the lamp has reached the
maximum rated life and should be replaced immediately. After the lamp has flickered
for about five minutes it should strike normally allowing the fixture to be used tempo-
rarily until a replacement lamp can be installed. The fixture will continue to operate
for an additional 300 hours, however the "Replace the Lamp" warning will continue
to flash in the display. Keep in mind that the flicker protection circuitry will only work
for about 300 hours (lamp clock life of 6000-6300 hours). After 6300 hours the fixture
will no longer respond to DMX commands and immediately enter a hibernation mode
that will electronically discontinue all fixture functionality with the exception of a few
menu commands. The fixture will continue to enter hibernation mode until the lamp
is replaced and the lamp clock has been reset. See page 22 to Clear the lamp time.
ADJ Products, LLC - www.adj.com - 3 Sixty 2R Instruction Manual Page 7
Advertisement
Table of Contents
